What I learned redrawing a steelworks mark
Viga’s mark had to work cut from a steel plate, stamped on a beam and shown on a phone. Redrawing it taught me to start from the hardest place it lives.

Viga cuts and bends structural steel in an industrial park off the 40. Their old mark was a gradient V inside a hexagon, drawn for a website in 2011.
On the website it looked fine. On a three-tonne beam it was a grey smudge with a sticker beside it saying what it was meant to be.
Start where it’s hardest
I asked where the mark appeared most often. The answer wasn’t the site or the trucks. It was the paint stencil the yard sprays on every finished beam, about four thousand times a year.
So the stencil became the brief. If the mark worked as sprayed paint on rusty steel, the screen would take care of itself.
What a stencil allows
A stencil can’t hold a closed shape without bridges, can’t show a gradient and blurs anything thinner than about six millimetres. Those three limits did most of the drawing.
What we tested
We cut eight versions from card and sprayed them on offcuts in the yard. Five failed on the first try, mostly because thin joins filled in.
The rules that came out of it
By the end the mark had a short list of rules that every later version had to pass:
One colour, with no tints or outlines
No stroke thinner than one sixth of the height
Open counters, so a stencil needs no bridges
Readable at 16 pixels on a phone
The fourth rule was the only one written for a screen, and it passed without a change.
Old mark and new mark
Side by side, the difference is mostly about what the mark stopped trying to do.
| Where it lives | Old mark | New mark |
|---|---|---|
| Sprayed stencil | Hexagon fills in | Clean at any size |
| Laser-cut plate | Needed redrawing | Cut from the file |
| Phone icon | Gradient turns grey | Sharp at 16 px |
Anton Vermeer, who runs operations at Viga, judged it by a different test:
The guys in the yard stopped asking which way up it goes. That’s how I knew it was finished.
Find the hardest place first
Before you sketch a mark, ask the client to list every place it appears and how often. Then design for the roughest one on the list.
The polished places, the website and the letterhead, are forgiving. A beam isn’t. If you’d like to see the full Viga project, it’s in the work.
